参考设计

NXP SSL2102 30W反激式TRIAC调光LED驱动电源设计指南

发布时间:2012-09-27 00:00:00 来源:电子元件技术网 责任编辑:echotang

导读:SSL2102 IC是为闪烁调光设计的LED驱动电源,SSL2102 IC可以用在降压或反激变换器的拓扑结构中,反激拓扑结构在电器输出隔离上是必须的。当考虑到效率和开关尺寸而选择输出电压额定值时,他可以提供很大的自由度。这份应用指南描述怎样提高基本的双向可控硅调光电路实现高性能的设计。


SSL2102是SSL210x调光驱动系列的一部分,好包括:

1.SSL2101: SO16封装, 集成mosfet和泄放开关
2.SSL2102: SO20封装, 集成mosfet和泄放开关
3.SSL2103: SO14封装,外部MOSFET和泄放开关

1.1 The application requirement

When designing an application that can support a wide output voltage range and a constant current, it is important to dimension all components for the maximum output power. The basic application is optimized for a 30 W output and it can be scaled down relatively easily. The application described here, is a retro-fit application using a lamp within an existing infrastructure. The application targets the lower end of the market(commercial, domestic) and has the following specifications:

• Output power of 30 W
• Power factor of 0.7 or larger
• 150 mA peak-to-peak output current ripple ( 10 %)
• Efficiency of 72 %
• The lamp is compatible with a triac dimmers, without noticeable flicker or jumps on the output
• The input voltage is 230 V, 50 Hz
• The output voltage is 42 V, 700mA

1.2 The design choices

The SSL2102 is rated for a maximum output power of 25 W. A higher output power might cause life time issues due to improper cooling. This must be taken into account when the PCB is designed and an extra heatsink might be required.The output power is important for the selection of the transformer. For outputs above 26 W, an E30 or an EFD30 core must be used. The transformer will take up a large part of the required space.The design is optimized for a 230 V (AC) input.

Almost all component values will change when the design is modified for 120 V (AC).Because the input voltage is halved, the input current must be doubled to have the same output power. The buffer capacitance must be doubled, the turns ratio must be changed,the damper resistor can be halved, etc. The brightness control circuit is also optimized for 230 V (AC), which determines the dimmer duty factor by averaging the rectified input voltage.

设计详情请下载技术资料

要采购开关么,点这里了解一下价格!

为您推荐

恩智浦电源IC满足EuP lot 6标准 立适配器待机功耗新标杆 人物专访

恩智浦电源IC满足EuP lot 6标准 立适配器待机功耗新标杆

为了提高电能利用效率、降低待机功耗,欧洲和美国不断提高能效标准等级,如欧盟移动电源5星标准、能源之星及EuP lot 6 等,对于电子系统厂商来讲,开发满足上述能效标准的产品是重点也是难点。将于2013年生效的EuP lot 6标准要求适配器在0.25W负载下待机功耗要小于0.5W,液晶电视电源在0.2W负载下待机功耗小于0.5W。恩智浦半导体大中华区资深产品经理张锡亮表示,GreenChip系列开关电源(SMPS)控制器芯片TEA1716,能够帮助厂商开发出符合新的欧盟耗能产品指令(EuP)Lot 6要求的小型电源适配器。

能源电路 电源管理 光电显示 MOS管 NXP(恩智浦)

TEA1713:恩智浦推出集成PFC控制器和谐振控制器的绿色芯片 新品速递

TEA1713:恩智浦推出集成PFC控制器和谐振控制器的绿色芯片

恩智浦半导体(NXP Semiconductors)近日宣布推出绿色芯片TEA1713半桥谐振转换器——这是业界首款将功率因数校正(PFC)、容性模式保护和自适应式死区时间控制等多种功能集成于一体的谐振控制器。高性能绿色芯片TEA1713可以构筑性价比极高的电源解决方案,帮助设计人员打造出效率和可靠性俱佳的谐振电源,其典型应用包括90W以上的液晶电视电源、等离子电视电源、个人电脑电源和超薄型电源适配器,以及优质工业及医疗用电源等。

医疗穿戴 电源管理 光电显示 NXP(恩智浦)

特别推荐

更多

行业动态

更多

技术应用

更多

选型替代

更多

产品信息

更多

热门搜索

更多

欢迎登录

没有账号,

账号注册

注册成功!

3S后自动为你跳转登陆